Benchside / Wall storage / Framed Pegboard Panel
Wall storage
Framed Pegboard Panel
Pegboard on a frame of 1x3s that stands it off the wall, so hooks seat properly, screwed into the studs.
Standard size48 × 1 × 32 in
You'll need3 1x3s, 1 sheet
Parts to cut7
Plan$15, once
Change any size and Benchside redraws it, recounts the material and rebuilds the plan.
Built around your shop
- Any width and height
- Uprights set on 16" spacing to land on studs
- How high off the floor it starts
How it goes together
- Build the frame: top and bottom rails, sides, and uprights between.
- Screw the frame to the studs.
- Screw the pegboard to the frame with washer-head screws, holes lined up with the frame edges.
The plan has every step written against the part letters in its cut list, with drawings of each part that has joinery.
What you can change
SizeFrame behind the board
Hardware
| 1 | Pegboard hook kit |
Plus screws and glue, counted in the shopping list.
In the $15 plan
- Cut list with every part lettered
- Cutting diagrams for every sheet and board, grain kept straight
- Printable build plan: overview, drawings, part drawings and steps
- CNC files: DXF sheets and a STEP 3D model
Bought once for your design, and it stays yours through any edits and resizes. The 3D view and shopping list are free.
